Fuel Tanks
Single Skin
Please note, if the tank is to be situated within
- - 50 metres of a well, borehole or spring
- - 10 metres of controlled water e.g. open drain, manhole cover, river, stream or lake
or
- - if the tank's vent is not visible from its fill point
- - if the capacity exceeds 2500 litres
- - if any potential spillage could run over ground into controlled waters
then the tank must be bunded.
V1360

| Diameter(mm) | 1200 | Height (mm) | 1450 | Footprint(mm) | 1200 |
V2500

| Diameter(mm) | 1650 | Height (mm) | 1450 | Footprint(mm) | 1650 |
V5000

| Diameter(mm) | 1960 | Height (mm) | 2120 | Footprint(mm) | 1960 |
SL1230

| Length(mm) | 1860 | Height(mm) | 1400 | Width(mm) | 590 |
LP1230

| Length(mm) | 1830 | Height(mm) | 890 | Width(mm) | 1060 |
H1360

| Length(mm) | 1620 | Height(mm) | 1180 | Width(mm) | 1100 |
H2000

| Length(mm) | 1950 | Height (mm) | 1270 | Width(mm) | 1200 |
H2500
| Length(mm) | 2150 | Height (mm) | 1380 | Width(mm) | 1300 |
Bunded Tanks
Bunded tanks are designed for the storage of heating fuels for industrial, commercial, agricultural or institutional installations
Please note, if the tank is to be situated within
- - 50 metres of a well, borehole or spring
- - 10 metres of controlled water e.g. open drain, manhole cover, river, stream or lake
or
- - if the tank's vent is not visible from its fill point
- - if the capacity exceeds 2500 litres
- - if any potential spillage could run over ground into controlled waters
BV1360

| Diameter(mm) | 1440 | Height (mm) | 1630 |
BV2500

| Diameter(mm) | 1900 | Height (mm) | 1625 |
BV5000

| Diameter(mm) | 2190 | Height (mm) | 2400 |
BSL1000

| Length(mm) | 1870 | Height(mm) | 1530 | Width (mm) | 625 |
BSL1230

| Length(mm) | 2250 | Height(mm) | 1610 | Width(mm) | 910 |
BH1360

| Length(mm) | 1870 | Height(mm) | 1350 | Width (mm) | 1300 |
BH2000

| Length(mm) | 2230 | Height(mm) | 1420 | Width (mm) | 1400 |
BH2500

| Length(mm) | 2430 | Height(mm) | 1575 | Width (mm) | 1480 |

